In & Out

For normal operation, connect the source (wire from guitar, or output of a wah-wah pedal) to the IN jack of the Octave effect, the one all the way to right. Connect the amp to the OUT jack of the FuzzFoot effect, the one all the way to the left. The guitar signal is automatically fed from the Octave to the Provibe and from the Provibe to the Fuzzfoot. If that's the order of effects you want, no other patching is required. If you want to experiment with different orders of effects, you will need two extra of ¼" patch cords. By treating each effect as an individual effect unit, you can use the individual IN and OUT jacks to patch together any order of effects. You can also use these jacks for inserting other effects into the signal chain.