Captain Coconut 2 Owners Manual

Technical Information

Dimensions:
Width = 10 1/8” Depth = 6 1/2” Height = 3”
When planning space on a pedal board, add 1” to the depth if you’re using right angle plugs, add 2” if you’re using straight plugs. Also, the Height measurement of 3” represents the overall height, from the bottom of the rubber feet to the top of the knobs. If you plan on removing the rubber feet for mounting purposes, subtract 1/2”.

Weight:
4 1/2 Lbs.

Current draw:
Based on 9 Volts AC - Absolute maximum (with Provibe Center control turned up full, all three effects activated) - 429 mA. Typical current draw during normal operation - 200 mA.

Switching:
All signal switching is done with 12 volt DC audio relays. The relays are located in very close proximity to the Input& Output jacks, keeping signal runs to a minimum. The relays are set up in a TRUE BYPASS configuration in which the effect’s input connects are grounded when not in use. The three foot switches are used to provide a ground path for the relay switching coils. This means that no audio passes through the foot switches, just a control voltage, which also passes through the status indicator LED’s causing them to illuminate. Captain Coconut 2 can easily be modified for remote switching. A rack-mounted version of Captain Coconut 2 is also available. Contact Foxrox Electronics for more information.

Chassis metal:
Cold-rolled steel, powder coated and silk screened. Enclosure top: 16 gauge, enclosure base: 14 gauge.